Raw Materials · Construction Materials
Steel Reinforcement
Steel Reinforcement sourced for companies across the UK and EU. Verified suppliers, benchmarked pricing and the full document pack.
Overview
What Steel Reinforcement is and who uses it
Steel Reinforcement is one of the commodities we source regularly. Material in this category goes into concrete production, structural frames and reinforcement, road surfacing, plaster and board manufacture, and general building works. We agree the specification, the grade and any certification you need before we approach a single supplier.
Why go through us rather than buying direct
With raw materials the legality risk sits upstream of whoever sells to you. Under EUDR and the timber regulations the obligation lands on the importer, and a supplier's word is not a defence if you are challenged. We trace the chain back to the plot or the mill and keep the evidence you would need to produce.
Specification
Variants & Grades
The grades below are the ones traded commercially. If a grade has a standard code, put the code in your brief rather than describing the material. Codes are enforceable in a contract. Descriptions are not.
- Rebar B500B
- Rebar B500C
- Welded Wire Mesh
- Structural Sections
- Hot Rolled Coil
- Galvanised Sheet
Sourcing
Origin Countries
We source this from the countries below. Origin is not a preference. It decides which phytosanitary and licensing rules apply, what specification is achievable, how the freight routes and what sanctions exposure you take on. We choose it against your compliance and delivery needs, not on price alone.
Standards
Compliance & Documentation
Everything below is applied as standard on this commodity. You get the complete document set when the transaction closes.
- UKCA and CE marking under the Construction Products Regulation, with a declaration of performance for every consignment
- Harmonised EN standards: EN 197-1 for cement, EN 12620 for aggregates, EN 10080 for reinforcing steel
- Factory production control certification from a notified body
- Mill test certificate or works certificate per heat and batch
- Chromium VI limits in cement under REACH, with the reducing agent's effective shelf life stated
- Radiological screening certificate where the destination requires it for natural aggregates
- Sanctions screening on producer, vessel and counterparty
Verification
Quality & Inspection
Put the parameters below in your brief with a tolerance against each, not a single target figure. A specification without tolerances gives the contract nothing to fall back on when a cargo lands marginally out.
- Compressive strength class (N/mm² at 2, 7 and 28 days)
- Initial and final setting time (minutes)
- Particle size distribution and grading envelope
- Chloride and alkali content (%)
- Yield and tensile strength, elongation at fracture (steel)
- Penetration and softening point (bitumen)
- Los Angeles abrasion and flakiness index (aggregates)
- Moisture content and fines (%)
We appoint an independent inspection agency at origin. They check quantity, quality against what was contracted, and the condition of the packaging, all before the shipment is released for loading. That certificate is what any later claim rests on.
Movement
Getting it to you
| Packaging | Bulk for cement and aggregates, 1.5 MT jumbo bags or 50 kg sacks on shrink-wrapped pallets, bundled and tagged bar for reinforcement |
|---|---|
| Shipment | Bulk carrier for volumes above 5,000 MT; 20 ft FCL at approximately 25 to 27 MT, weight rather than volume limited |
| Storage | Dry and covered, off the ground on bearers. Cement is moisture sensitive and loses strength class once it has taken up water |
| Incoterms | FOB, CFR, CIF, DAP |
Engagement
How to order Steel Reinforcement
Send us a brief covering the points below. Within one working day we will tell you whether we can fulfil it, how we would approach it, what paperwork it needs and roughly how long it takes.
- Which grade of Steel Reinforcement you need, with tolerances
- Volume, and whether this is one shipment or a regular requirement
- Where it needs to land, which port, and by when
- Any certification you need: organic, Halal, Kosher, RSPO, FSC or other
- Preferred Incoterms and how you want to pay
- Packaging format and any labelling
Next step
Need Steel Reinforcement?
Send us the specification, the volume and when you need it. We will confirm whether we can do it, and how, within one working day.